Iqbalgsm Worldwide delivery Trusted by 5,000+ technicians
Iqbal GSM

Suggestions

Products

Search for “” →
Shop All Part Request Wholesale Membership

Categories

2UUL TOOLS YF BATTERY CABLE Maant Mijing Fold flex cable Flip flex cable Soptop LCD FPC CONNECTOR BATTERY CONNECTOR IG PRODUCTS Octopus
Account
 iPHONE 13P/13PM/14P/14PM/15PM Back Camera 3X Blue Lens
In Stock

iPHONE 13P/13PM/14P/14PM/15PM Back Camera 3X Blue Lens

4.0 (12 reviews)

As low as

Rs 900.00

Worldwide shipping · Cash on Delivery

Quantity
Unit price Rs
Quantity
Total Rs
Ask on WhatsApp
Seller: Iqbal GSM

Product Details

================================================================================

IPHONE 13P/13PM/14P/14PM/15P 3X TELEPHOTO (77MM ƒ/2.8) BLUE LENS REWORK GUIDE

================================================================================

1. OPTICAL & ELECTROMECHANICAL ARCHITECTURE (77MM ƒ/2.8 LENS-SHIFT OIS SYSTEM):

   Across the iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, and 15 Pro, Apple standardized the 3X Telephoto sub-module around a 77mm equivalent focal length paired with a 12MP Sony IMX713 CMOS image sensor (1.0 µm pixel pitch, 1/3.4" optical format).

   A. Combined Z-Axis Autofocus & Dual-Axis (X/Y) Lens-Shift OIS:

      - Unlike the 1X Main camera (which utilizes 2nd-Gen Sensor-Shift OIS where the sensor moves and the lens is static), the 3X Telephoto sub-module utilizes **Lens-Shift Optical Image Stabilization**:

        1. The 6-element 3X Blue Lens barrel is suspended within the magnetic actuator housing by four microscopic beryllium-copper suspension wire flexures (each ~0.04 mm in diameter).

        2. Four perimeter voice coils dynamically shift the entire 6P optical barrel along X and Y axes to counteract hand tremor, while simultaneously translating along the vertical Z-axis to achieve focus from 15 cm to infinity.

      - Vulnerability: The four suspension wire flexures are extremely fragile. Any off-axis mechanical prying or downward pressure during lens extraction will snap or bend these wires, destroying the OIS mechanism and causing the camera to buzz or fail to focus.

   B. Telephoto Dust Sensitivity & Magnification Effect:

      - Due to the long 77mm focal length and narrow depth of field, dust contamination on the internal Blue Glass IRCF or the CMOS sensor surface is magnified significantly compared to standard wide lenses.

      - A dust particle as small as 15 microns resting on the Blue Glass IRCF creates a distinct, semi-translucent dark gray blotch across 3x portraits and telephoto video.

--------------------------------------------------------------------------------

2. THERMAL, CHEMICAL & MECHANICAL SAFETY CONSTRAINTS:

   - STRICT LIQUID SOLVENT PROHIBITION:

     * NEVER apply Isopropyl Alcohol (IPA 99%), acetone, flux cleaners, or liquid lens wipes to the camera interior, the Blue Glass filter, or the Sony IMX713 CMOS die. Liquid solvents dissolve the internal black light-absorbing barrel coating, compromise the glue bonds holding the 6 aspherical elements, and leave irreversible drying rings across the CMOS microlens array.

   - Thermal Ceiling:

     * Maximum safe temperature for softening the 3X barrel perimeter adhesive: 65°C – 75°C.

     * Exceeding 80°C warps the 6P polymeric aspherical lens stack (causing permanent spherical aberration and astigmatism) and permanently weakens the VCM Neodymium (NdFeB) drive magnets.

   - Non-Magnetic Tool Requirement:

     * Strictly use non-magnetic titanium tweezers (0.1 mm precision tips). Standard stainless steel tweezers will be pulled into the VCM magnets, crushing the delicate 0.04 mm OIS suspension wires or severing the perimeter CMOS gold wire bonds.

--------------------------------------------------------------------------------

3. STEP-BY-STEP CLEANROOM 3X BLUE LENS REPLACEMENT PROCEDURE:

   STEP 1: Module Extraction & Protective Shielding

   - Power off the iPhone, disconnect the battery, and remove the rear triple-camera assembly from the chassis.

   - Immediately apply residue-free anti-static blue protective film over the 0.5x Ultra-Wide and 1x Main lenses, as well as the LiDAR sensor window, to prevent dust transfer.

   - Secure the camera module in a CNC aluminum repair fixture under a Class 100 laminar flow cleanbench and stereomicroscope (10x – 45x magnification).

   STEP 2: Softening & Scoring the 3X Barrel Perimeter Adhesive

   - Locate the circular seam where the black plastic 3X lens barrel joins the upper VCM actuator carrier collar.

   - Set the hot air rework station to 70°C (Airflow: 15%) and warm the top rim of the 3X telephoto sub-module for 15 seconds.

   - Using a fresh No. 11 surgical scalpel blade (or ultra-thin ceramic micro-blade), carefully score the 360-degree perimeter bead of black elastic adhesive sealing the barrel to the VCM collar.

   - CRITICAL: Maintain blade cutting depth < 0.20 mm. Directly beneath the outer collar sit the four beryllium-copper OIS suspension wire flexures; cutting or bending any wire permanently disables optical stabilization.

   STEP 3: Damaged 3X Blue Lens Barrel Removal

   - Grasp the upper lip of the damaged 3X lens barrel using fine non-magnetic titanium tweezers.

   - Apply gentle counter-clockwise rotational tension while lifting strictly vertically along the Z-axis.

   - Once freed, clean residual adhesive fragments from the VCM inner seating step using a dry micro-probe and a silicone gel sticky swab to ensure the new barrel sits 100% planar.

   STEP 4: Sony IMX713 CMOS Sensor Dry Cleaning

   - Inspect the bare Sony IMX713 CMOS die under angled green/white LED illumination at 30x – 40x magnification.

   - NEVER touch or brush the dense rows of microscopic gold wire bonds lining the perimeter of the silicon die.

   - Remove dust specs from the active pixel grid strictly using a **Silicone Gel Sensor Cleaning Stick (Dust-Free Sticky Swab)**:

     * Touch the silicone tip to clean adhesive backing paper first to neutralize surface static.

     * Lower the gel tip vertically onto the dust particle with feather-light contact (< 2 grams of force) and lift straight up.

     * NEVER wipe or drag the swab across the sensor surface. Use a filtered rubber hand bulb to blow loose perimeter particles away.

   STEP 5: New 3X Blue Lens Installation & Seating

   - Inspect both optical surfaces (top convex element and bottom Blue Glass IRCF) of the replacement 3X Blue Lens under the microscope to ensure zero dust, smudges, or coating defects.

   - Lower the replacement 3X Blue Lens vertically into the VCM carrier ring until its locating shoulder rests completely flush against the internal mechanical stop.

   - Verify coplanarity under 20x magnification: the top of the barrel must sit parallel to the metal shield housing. Any tilt on a 77mm telephoto optic induces severe asymmetrical edge blur.

   STEP 6: Live Infinity Focus Calibration & UV Adhesive Curing

   - Connect the camera module to a test motherboard and launch the iOS Camera app:

     * Switch to 3x mode and test focus at infinity (> 10 meters) to confirm crisp resolving power.

     * Test near-focus tracking at 15 cm – 30 cm to confirm smooth VCM autofocus travel.

     * Aim at a uniform white background to verify complete elimination of dark spots and flare.

   - Apply four micro-dots of black UV-curable optical adhesive at 90-degree intervals around the barrel-to-VCM seam using a 0.1 mm acupuncture needle.

   - Cure with a 365 nm UV LED lamp for 25 seconds, followed by a continuous thin perimeter bead of black light-blocking sealant.

--------------------------------------------------------------------------------

4. DIAGNOSTIC MATRIX & BOARD-LEVEL ELECTRICAL REFERENCE VALUES:

   A. Post-Rework Optical & Electromechanical Fault Matrix:

   ┌────────────────────────────────┬────────────────────────────────┬────────────────────────────────────────────────────┐

   │ Observed Camera Symptom        │ Subsystem Involved             │ Root Cause & Corrective Action                     │

   ├────────────────────────────────┼────────────────────────────────┼────────────────────────────────────────────────────┤

   │ 3x photo has one side blurry   │ 3X Optical Barrel Coplanarity  │ Adhesive debris under barrel shoulder causing lens │

   │ while other side is sharp      │ (Decentering / Tilt Aberration)│ tilt -> Lift barrel, clean VCM ledge flat, reseat. │

   ├────────────────────────────────┼────────────────────────────────┼────────────────────────────────────────────────────┤

   │ 3x image hunts continuously or │ Beryllium-Copper OIS Wires /   │ Bent OIS suspension wire or severed VCM drive coil │

   │ camera clicks/jitters violently│ Voice Coil Motor               │ during prying -> Requires complete module swap.    │

   ├────────────────────────────────┼────────────────────────────────┼────────────────────────────────────────────────────┤

   │ Sharp at close range (30 cm),  │ Flange Focal Distance (Z-Axis) │ Barrel sitting too high; not pressed down flush to │

   │ but blurry on distant objects  │                                │ internal stop -> Reseat barrel fully onto ledge.   │

   ├────────────────────────────────┼────────────────────────────────┼────────────────────────────────────────────────────┤

   │ 3x icon absent in Camera app;  │ CMOS Gold Wire Bonds / I2C Bus │ Severed gold wire bond on IMX713 die or damaged    │

   │ app freezes when zooming to 3x │                                │ FPC flex cable -> Inspect sensor bond pads/FPC.    │

   ├────────────────────────────────┼────────────────────────────────┼────────────────────────────────────────────────────┤

   │ Faint gray circular shadow on  │ Blue Glass IRCF / CMOS Silicon │ Micro-dust particle remaining on center of sensor  │

   │ bright backgrounds             │                                │ -> Lift barrel and dab sensor with clean gel swab. │

   └────────────────────────────────┴────────────────────────────────┴────────────────────────────────────────────────────┘

   B. Cold Diode-Mode Motherboard B2B Connector Reference (Red Probe on GND, Black on Pin):

   - MIPI CSI-2 High-Speed Differential Data & Clock Lanes (3X Telephoto 4-Lane Bus):

     * Expected Diode Reading: 0.380V – 0.455V (All positive/negative differential pairs must match within +/- 0.005V).

   - Power Supply Rails for 3X Telephoto Sub-Module:

     * PP2V8_CAM_TELE_AVDD (2.8V – 2.9V Analog CMOS Supply): 0.445V – 0.535V

     * PP1V2_CAM_TELE_DVDD (1.15V – 1.2V Core Logic Supply): 0.305V – 0.380V

     * PP1V8_CAM_IOVDD (1.8V Digital IO & EEPROM Bus): 0.460V – 0.540V

     * PP2V8_CAM_TELE_AF_OIS (2.8V – 3.0V VCM & Lens-Shift OIS Actuator Supply): 0.435V – 0.515V

   - Control, Clock & Telemetry Signals:

     * I2C_CAM_TELE_SCL / SDA (Bi-Directional Control & OIS Telemetry Bus): 0.480V – 0.560V

     * AP_TO_CAM_TELE_CLK (24 MHz Master Reference Clock from SoC): 0.405V – 0.475V

     * AP_TO_CAM_TELE_SHUTDOWN_L (Active-Low Hardware Enable/Reset): 0.470V – 0.550V

================================================================================